Vestax VRX-2000 (r)
October 2024
|
|
|
|
|
PRODUCT DESCRIPTION:
The VRX-2000 vinyl cutting machine can give you superb results in the making of long-lasting vinyl records. To achieve such results, please remember that the mastering process of vinyl records requires skill and a basic understanding of complicated audio waveforms. Cutting vinyl from a cassette-based multi-track recording or a stereo cassette recorder should prove to be straight forward, as the frequency response of cassette-based music is not as intense as that of a CD. Cutting from professionally mastered CDs that have good equalization and compression should also give excellent results. However, recording from some CDs (for example, CDs from home studio set-ups) may provide difficulties. This is due to the fact that these recordings sometimes have very wide frequency ranges, and have not been prepared professionally for mass-production or broadcast. Please study and understand compressors and limiters and how to use equalizers to get the best result from your Vestax VRX-2000. view full description »
The VRX-2000 head frequency equalisation is equipped 3 Band EQ. The manner by which the cutting head reacts to various frequencies will affect the final output. Basically, the cutting head is like a very small yet powerful speaker when it reacts to various s ound frequencies. Extreme frequencies will cause it to move rathers everely, with that movement being further reflected in the sound recorded. The Vestax VRX-2000, however, utilizes a standard graphic EQ system to compensate for extreme incoming signal curves. This system is aurally difficult and requires hours of practice and experimentation to get it perfect over and over again. The cutting head has 2 magnetic drivers separated by a 90 degree angle creating a V shape. This layout is optimum for stereo signal recording with the best possible channel separation, and best balance.
The special blank vinyl for the VRX-2000 has a similar durability of commercial vinyl, but a record cut in improper circumstances/condition may have less durability than usual. The life of the cutting stylus is approximately between 200-300 minutes (depending on the cutting pressure used and the level of stylus heat). Vestax VRX-2000 has a built-in limiter bypass switch: turns the internal compressor limiter ON or OFF. Must always be in on position unless external compressor limiter devices are used in the cutting process. Input level select switch: adjusts the input gain +4dB / 0dB/ -10dB and Phono level output jacks: standard RCA L/R output jacks for playback. On rear side of Vestax VRX-2000 are placed connectors: XLR balanced left/right audio input and unbalanced audio input standard L/R RCA sockets and ground terminal.
Tip: this Vestax premium vintage product will be refurbished, with standard 1 year warranty.
Notice: customers with valid / paid pre-orders have priority when ordering this product.
INFO: this product cannot be ordered, limited QTY is already reserved!
KEY FEATURES:
- the Vestax VRX-2000 can give you superb results in the making of long-lasting Vinyl records for the experienced professional musician
- built-in RIAA equalizer, 3 Band EQ utilizes a standard graphic EQ system to compensate for extreme incoming signal curves (nominal)
- extreme Japanese engine torque, controlled by a 32 bit CPU processor and digital servo system generates a very stable rotation
- speed select switch: selects the speed – 33 1/3 RPM or 45 RPM; pich control adjusts pitch of platter +/- 10%
- built-in IONISER for reduces static build up and high quality professional stereo cutting head Made in Japan
- manual rotation wheel to set the position of the cutting arm in the correct place on the vinyl blank disk
- tracking arm: arm to hold cutting head and apply correct pressure, soft adjusts cutting pressure
- blank disk for cutting capacity of 14 minutes of recording per side A / 14 minutes per side B
- delicate sapphire cutting stylus with the life of the stylus 200-300 minutes
- no cooling system is needed, can use a small power amplifier
- slider arm base: mechanism to move the cutting arm
- slider cam: locks the cutting arm in place
- heater current meter: visual display of the level of heat applied to the cutting stylus
- recording level volume control: to adjust the level of the incoming signal
- VU level meters: a display of the input level signal left and right
- robust legs with rubber and air bags (means better absorption)
- product was restored, origin from demo stock
- the power supply adjusted to the 230V / 50Hz
- product refurbishing with warranty
TECHNICAL PARAMETERS:
Motor | 24-pole DC Engine, Quartz System, controlled by 32-bit CPU processor + digital servo |
Drive type | Direct Drive |
Torque | >4,7 kg/cm |
Nominal speed | 33⅓ RPM / 45 RPM |
Rise to NS | <0,5 sec. (33⅓ RPM) 70° |
Abberation | <0,07% W.R.M.S |
Pitch / Ultrapitch | +/- 10% / none |
Tone arm | A.S.T.S. (Anti Skipping Tone arm System),linear with continuously adjustable DSP |
Max.pressure | ≤7 g standard, DSP (Dynamic Stylus Pressure) +5 g extra |
Frequency | 20 Hz ~ 20 kHz (±3 dB) |
Crosstalk | >65 dB |
Distance S/N | >78 dB (IEC 98WTD) |
Power supply | AC 230 V ~ 50/60 Hz |
Power consumption | 98 W |
Dimension | 454 x 196 x 365 mm |
Weight | 14,9 kg (netto) |
Accessories | SA-22 LacquerDiscs™ (blank disk for cutting, 20 pcs) VRX-2000 User Manual (brochure) VRX-2000 Training SV (brochure) VRX-2000 Spare Cutting Stylus (1 pc) |
DOWNLOAD:
PHOTOGALERY:
PRODUCT VIDEO:
Currency Converter
You will immediately find out how much you will pay. Enter the amount of the product price in the EUR - € field and you will get the conversion to your local currency. Current exchange rates by the ECB (The European Central Bank), services provided by FreeCurrencyRates.com.
Add comment
Comments - Overview
-
Inquiry About Availability of VRX-2000 Vinyl Cutting Machine
(Isaac Robinson, 29 Aug 2023 17:12:00)
Reply
| Show replies
I am writing to inquire about the current availability of the VRX-2000 Vinyl Cutting Machine. I recently came across information about this machine and its exceptional capabilities in producing high-quality vinyl records, which greatly piqued my interest... (more in mail)
-
Re: Inquiry About Availability of VRX-2000 Vinyl Cutting Machine
(Vestax ADMIN, 25 Jan 2024 08:33:15)
Reply
Dear, If you need advice on the manuals for this VRX-2000 cutter, you can find them in the Download/Manuals section on websites. Well you go there also a special VRX-2000 Training manual. We do not have specific information on availability at this time, because the our service department is still out of order (see article in Newsreel). You can find practical information about this machine and its options in the Manuals section (where is also recommended special Training manual).
-
Svedek
(Patrik Svedek, 3 Nov 2023 20:04:17)
Reply
| Show replies
good day, what would be the price including postage to Slovakia, Vestax VRX-2000
-
Re: Svedek
(Vestax ADMIN, 25 Jan 2024 08:39:28)
Reply
Dear friend, we sent you the key information by email; the shipping price is based on weight (approx. 17kg btto). Details and more info about shipping can be found in the Shopping Quide section. Thank You.
-
Re: VRX 2000
(Andrew Morrison, 23 Mar 2024 09:07:49)
Reply
hello, please can you send the price and postage cost to UK
-
Vrx200
(Jörg Henze, 23 Mar 2024 20:53:00)
Reply
| Show replies
Hello, What will be the price for the product? Thx in advance. Best, Wjh
-
Re: Vrx200
(Vestax Customer Support, 31 Mar 2024 18:03:20)
Reply
Hello, the price ranges from $4,296 to $4,425 (it depends on the cost of refurbishing).
-
Pricing
(Lyall, 27 Mar 2024 15:30:00)
Reply
| Show replies
Hi. Can you please advise pricing for this unit, I see it becomes available in April 2024?
-
Re: Pricing
(Vestax ADMIN, 31 Mar 2024 18:06:29)
Reply
Hi, the price ranges from $4,296 to $4,425 (it depends on the cost of refurbishing). When this product will be ready for refurbishing, then the option to buy it: pre-order becomes available on store.
-
Whats the Price
(Daniel Blum, 12 Apr 2024 10:00:00)
Reply
| Show replies
can you tell me a price of one unit with shipping to germany please. Thanks Daniel at shizoworld.de
-
Re: Whats the Price
(Vestax ADMIN, 15 Apr 2024 10:00:43)
Reply
Hello, the price ranges from $4,296 to $4,425 (it depends on the cost of refurbishing). When this product will be ready for refurbishing, then the option to buy it: pre-order becomes available on store. Shipping to Germany cost approx 100€.
-
mr
(hasan younas, 13 Apr 2024 11:03:00)
Reply
| Show replies
Hi intrested in buying vestax vrx 2000 please could you advise. Thanks
-
Re: mr
(Vestax ADMIN, 15 Apr 2024 10:05:28)
Reply
Hello, we send further detailed information about the technical condition and possibilities of this VRX cutter in an email, orders will be allowed after the cost of its restoration will be assessed. The price may change accordingly.
-
Sound engineer
(Jean paul, 6 May 2024 08:37:03)
Reply
| Show replies
Hi I’m interested in placing a pre order for one unit I was wondering what the final price would be including shipping to New York City
-
Re: Sound engineer
(Vestax ADMIN, 6 May 2024 17:23:06)
Reply
Hello. Please wait until the availability will be updated. We ship worldwide and this product will be shipped in black HardCase packaging only (so the safety of transportation will be guaranteed). This month the HardCases are being prepared for production.
-
Vestax VRX 2000 LATHE CUTTING MACHINE record
(Zinhle, 10 Aug 2024 21:25:00)
Reply
| Show replies
Hi Hope you are well,I would like to purchase Vinyl Records Pressing Machine
for my store Gmbos Records. I have been trading since 2006. please kindly get back to me
here is my Social Media Links…[URL] Thank you Kindly. Zinhle Gerald Mhlanga…[hidden by personal data protection] -
Re: Vestax VRX 2000 LATHE CUTTING MACHINE record
(Vestax ADMIN, 13 Aug 2024 15:56:00)
Reply
Dear friend. This is an extraordinary offer because the qty was very strictly limited, as it is a unique small Vestax production. If one of the our customers canceled an already ordered item, it would appear again in this “Discount” offer. In this case, we will inform you ASAP. We will save your contact in the database of those interested in VRX-2000. Follow US.
-
Vrx2000
(Ouahid, 23 Aug 2024 08:22:49)
Reply
| Show replies
Bonjour avait vous encore si oui quelle est le tarif avec expédition en France merci
-
Re: Vrx2000
(Vestax ADMIN, 24 Aug 2024 12:59:02)
Reply
Cher ami, il s'agit d'une offre exceptionnelle car la quantité était très strictement limitée, car il s'agit d'une petite production Vestax unique. Si l'un de nos clients annulait un article déjà commandé, il apparaîtrait à nouveau dans cette offre « Discount ». Dans ce cas, nous vous en informerons dans les plus brefs délais. Nous enregistrerons vos coordonnées dans la base de données des personnes intéressées par le VRX-2000. Suivez-nous.